iTach WiFi to Serial (RS232)

Wirelessly connect, monitor, and control serial devices over a network and the Internet.

The iTach WiFi devices provide a new level of automation and control flexibility, enabling device networking without wiring.

The product is based on open systems and standards for easy integration and compatibility with PC based control software, iPhone/iPod/iPad control apps, and high-end control systems.

 

Power Input-5 to 16V DC@300mA (wall power adapter included)

                       -International plugs available

                       -USB power cable draws power from USB port (included)

 

SetupIntegrated web server for easy configuration
              Configure through TCP/IP set up commands

 

iHelp Setup UtilityDownloadable iHelp software simplifies network discovery and setup

 

Network ConnectionIndustry standard 802.11b wireless interface, 2.5″ antenna

                                       Supports wireless LAN, adhoc (for setup)  and Infrastructure modes

                                       Compatible to 802.11b/g

 

LED IndicatorsPower and all connectors to indicate activity

 

RS 232 PortMale DB9 Connector
                        1200 baud to 115 Kbaud Data Rates Supported
                        Odd, Even, and None Parity Settings
                        Bi-directional hardware RTS/CTS Flow Control

 

Device PackagingAluminum extrusion case, rubber end caps and plastic face plates
                                    Dimensions (LxWxH): 3.25″ x 2.25″ x 1.25″
                                    Weight: 3.25 oz. (6 oz. with power supply)

 

CertificationsFCC (Part 15, Class B), C-tick, CERoHs compliant

 

Shipping Box Dimensions(LxWxH) 9.0″ x 3.5″ x 2.0″
                                                 Weight: 1 lb.