Features

● RF distance up to 40m

● Support up to 16 million colors

● Color calibration

● Tunable white color from 2700K to 6500K

● Support R,G,B,W LED light, white color is more bright

● Remote Firmware upgrade

● Z-Wave plus, compatible with other Z-Wave devices

● Wireless signal repeater

 

Connecting iLED RGBW bulb to your Z-Wave gateway

1.Screw the iLED RGBW bulb into a socket.

2.Activate inclusion mode on your gateway.

3.Power on the bulb from OFF.

4.The bulb will flash once if it’s successfully connected to the gateway.

● Reset the bulb

Re-power the bulb 6 times(between 0.5-2 seconds each time).

When the 6th power on,the bulb flashes twice,which means the

resetting is successful.

 

Design Features
[Function]	Lighting control
[Installation]	Surface
[IP Degree]	IP20
[Power Supply]	N